This installation guide is written for LE 24W / 18W / 12W Flush LED Ceiling Light Fittings.
Step 1: Open the lampshade by turning in counterclockwise.
Step 2: According to the 3 screw bits on the lamp, drill 3 holes in the ceiling. And then insert the plastic screw anchors into the drilling holes. (Note: 4 screws for 18W LED Ceiling light SKU – 1500013 )
Step 3: Remove the original testing cord of the lamp by loosening the 3 crews in the wire connector of the lamp.
Step 4: Pass your power cord through the hole of ceiling lamp chassic. Then connect the Neutral Line, Live Line and Ground wire of power cord into the corresponding wiring ports of the connector.
Step 5: Put 3 screws into the screw bits of lamp chassis, and then fix the lamp chassis onto the ceiling.
Step 6: Put on the lampshade to lamp chassis by turning in clockwise.